Loading... Please wait...

EAGLETAC SX25L2 FLASHLIGHT KIT - 1305 Lumens/Beam Dst 433 yds

Hover over image to zoom

  • Image 1
  • Image 2
  • Image 3
  • Image 4
  • Image 5
  • Image 6
  • Image 7
  • Image 8
  • Image 9
  • Image 10
  • Image 11
  • Image 12
  • Image 13
  • Image 14
EagleTac Flashlights
200.00 Grams
$5.00 (Fixed shipping cost)

 Product Description

Technical Specifications


Head Dia. :  1.8 inches (47 mm)
Body Dia. :  1.2 inches (31 mm)
Length     :    9.5 inches (240 mm)
Weight     :  16.4 ounces (465 grams)


Battery Type

  • 2x26650 li-ion battery pack (included)
  • Only use the built-in charger to charge EAGTAC original 7.4V battery pack

Operating voltage

  • 2.7V - 8.4V

What's included

  • SX25L2 flashlight
  • Spare o-rings
  • User Manual
  • 7.4V li-ion battery pack (R33) and spare waterproof charging cap
  • EAGTAC 18W AC-DC adapter (standard 5.5mm/2.1mm positive center pin)
  • 12V car DC adapter to charge the flashlight.
  • Holster


Battery Pack

  • IC protected, prevents over-charge, over-discharge, short circuit
  • 7.4V li-ion battery pack (R33)
    • 4500mAh capacity, 33.3Wh

Accessories / Spare parts

  • 7.4V li-ion Battery packs (R33)
  • Miniature AC-DC adapter7
    • 100V-240V to 10V@1.8A, 18Watts
    • US version - UL certified, PSE certified
    • European version - TUV/CE certified
  • 12V Automobile DC adapter
  • Turbo head (SX25L2T reflector) w/ protective end cap
  • YGRB filter and diffuser filter
  • Rigid nylon holster w/ self-retention device
  • Lens


    • Cool White
      • CREE XM-L2 U2 LED

Max output

      • LED lumen: 1305
      • ANSI FL-14 lumen: 1049

Beam Profile

  • XM-L2 U2
  • Center lux: 39,300 lux
  • Center spot angle: 6°
  • Spill light angle: 57°
  • Beam distance: 433 yards / 396 meters



      • Waterwhite glass lens w/ harden treatment
      • Anti-reflective (AR) coating on both side (96% transparency)


LED circuit

      • C4000 SEL
        • Synchronous buck w/ efficiency of up to 95%
        • Non-dimming constant current regulation for all output levels
        • Very low standby current (uA)
        • Turbo boost technology5

Charging circuit

      • 1850SW
        • Highly efficient buck switch
        • Accepts input from 10V to 12V
        • Compatible with 12V automobile DC socket
        • Constant current and constant voltage charging method
        • Fast charge to 41% in one hour (R33)
        • Three hours safety timer w/ charging indicator


      • Smooth aluminum reflector


      • HAIII hard anodization aerospace aluminum


    • IPX-8 standard

Output and Runtime

  • Four brightness levels (Regular mode)
    • Led lumen: 1305-1159/636/120/10
    • ANSI FL-1 lumen: 1049-932/522/98/9
    • Runtime: 2.7/7.2/44/200+ hours (R33)
  • Two brightness levels (Tactical mode)
    • Led lumen: 1305-1159/200/Strobe I/Strobe II
    • ANSI FL-1 lumen: 1049-932/164/Strobe I/Strobe II
    • Runtime: 2.7/26 hours (R33)
  • Seven hidden auxiliary outputs7
    • Strobe/Strobe(Var)/Flash(Hi)/S.O.S.(Fast)/S.O.S./Becaon/Flash(Lo)


  • Basic - Turn on the light by press and release the on/off button switch (<0.4s). To turn off the light, press and release the switch again.
  • For momentary on, press and hold the button switch for immediate output.
  • Twist the head to select between four output levels. You can pre-select the desired output level before turning on the flashlight.
  • Instant Turbo output - at any output level, press and hold the flashlight for 100% output. Release the button to return to previous level.
  • Instant Strobe output - at any output level (or off), double press and hold the on/off button switch for strobe output. Release the button to return to previous level (or off).
  • To access auxiliary levels, starting at head tight position (1st level), loosen to 3rd (or 4th level) and tighten the head within one second to enter auxiliary setting. Repeat to cycle through all settings. Turn off the light or loosen the head to quit.
  • Advance (Programmable Features) To switch between tactical and regular mode, turn on the flashlight at 1st level, dial to 2nd level and then back to 1st level for five times within five seconds.


Carrying method

  • Para-cord lanyard
  • Rigid nylon holster w/ retention device

Other features

  • User replaceable glass lens
  • Power gauge
  • Turbo boost technology
  • Battery reverse polarity protection
  • Tail stand
  • Upgradeable turbo-size head and reflector


  • Ten years performance guaranteed warranty 


Battery Safety Precaution

All EagleTac flashlights are designed to use “button-top?battery (battery with protruding positive terminal). For rechargeable li-ion battery, use only EagleTac li-ion battery, or other protected li-ion battery with compatible length and diameter. Before using the battery, check and ensure the battery outer wrapping (the isolating plastic film that wraps around the metal housing of the battery) is complete. Broken battery wrapping may lead to short circuit and damage to the flashlight.

Lithium and Li-ion battery can explode or cause burns if disassembled, shorted, or exposed to high temperature. Do not mix new and used batteries. Do not mix batteries with different brand, capacity, voltage, or install batteries backwards.

NiMH rechargeable battery may release gas during discharge. If you experience an inflated switch boot or find high pressure being built inside the flashlight, switch off the flashlight immediately. Slowly loosen the tail-cap to reduce the internal pressure and replace all batteries. 

Battery Safety Precaution

Only use the integrated built-in charging socket to charge the original EAGTAC 7.4V battery pack. Charging unbalanced third party 7.4V battery pack, two individual 3.7V 18650 cells, or non-rechargeable batteries may result in battery and flashlight damage. 

For backup power use, you can purchase additional EAGTAC 7.4V battery pack. You can also use two individual 26650 batteries (w/ protection board is highly recommended), but keep in mind that you should not charge any non EAGTAC 7.4V battery pack with the integrated charger.

Safety charging timer

Our advice that you turn off the flashlight during charging for fast and full charge. Leaving the flashlight on during charge may pause it. The charging circuit uses constant current / constant voltage method to charge the li-ion batteries quickly and safely. The secondary LED turns on in solid blue color during fast charge state. When the battery is full, the indicator turns dim. A built-in countdown timer is implemented to shut off the charging circuit within three hours. User may remove the charger plug shortly after the charging indicator turns dim for immediate usage without waiting for it to turn off completely.

If the battery is nearly drained, it may only reach to 90%+ capacity within the three hours timer due to the �“soft charging?feature for safety reasons. To reset the timer, simply remove and re-insert the charging plug anytime during charge. It is not necessary to charge to 100% for every single time unless absolute maximum runtime is needed. Charging to slighly lower voltage will actually prolong battery life.

Flashlight Maintenance

Periodically clean the threads and o-rings with a lint free cloth and apply a thin coating of EagleTac synthetic grease to the o-rings and threads. After prolonged exposure to moisture, the head and batteries should be removed, inspected, and dried. Do not touch or attempt to clean the reflector, as it will scratch the reflective coating permanently.

 Product Videos

Crash Test EagleTac MX25L2
  • Crash Test EagleTac MX25L2

 Warranty Information

We warrant our flashlights to be free from defects in workmanship and materials. We will repair, replace at our option, without charging any product or part which is found to be defective under normal use within 120 months from the date of purchase with the proof of purchase.

Electronics, chargers and rechargeable batteries are covered for a period of 12 months with purchase receipt. Such repair or replacement shall be the purchaser’s sole and exclusive remedy under this warranty. Normal wear and tear including batteries draining is not covered, nor is damage resulting from modification, misuse, abuse, neglect, battery leakage, improper maintenance or repaired by anyone other than EagleTac.

 Find Similar Products by Category

Vendors Other Products

 Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

You Recently Viewed...


Quick Links

What's News

Copyright 2020 SaskLights. All Rights Reserved.
 Sitemap | BigCommerce Premium Themes by PSDCenter

Click the button below to add the EAGLETAC SX25L2 FLASHLIGHT KIT - 1305 Lumens/Beam Dst 433 yds to your wish list.